Will you be attending the Plastics Caps & Closures North America Conference August 29th and 30th?

http://p0.vresp.com/DUZFWA ‪#‎vr4smallbiz‬
If you’ve ever been interested in used equipment, either buying or selling, the process for liquidation or the steps for an appraisal, we encourage you to reach out to Arlington while you’re in town.  We are well versed in all aspects of asset investment recovery and would love to connect with you.  If you’d like to set up a one-on-one ahead of time please contact Jeff Norman at 224-875-3715.

Our website www.arlingtonmachinery.com has our current list of equipment – we sell just about everything for plastics processing, but following are some highlights.

Machines Currently Available for Purchase.

8432 – 400 ton Netstal Synergy, 27.7 oz, Model S-4200/1700, Mfr. 1999
8430 – 440 ton Husky 157.3 oz, Model GL400 GEN-RS120/110, Mfr. 2001
8700 – 500 ton Krauss Maffei, 62.6 oz, Model KM500 C2 Plus-3500, Mfr. 2003
8506 – 600 ton Krauss Maffei, 77.39 oz, Model KM600/3500 C3, Mfr. 1999
8429 – 715 ton Krauss Maffei, 98 oz,  Model 650-8000-CM, Mfr. 1998

We’d like to invite you to stop by our office and warehouse on your way in to or out of town.  We’re located just 15 minutes from O’Hare and have a warehouse full of all types of equipment.   If you can’t make it this trip, then contact us any time you are in Chicago.

We look forward to hearing from you!

Arlington

4.5″ NFM/Gala 7 Rubber Compounding Line Available!!

121524.5″ NFM/Gala Rubber Compounding Line, Rubber Pelletizing Line Consisting Of the Following Pieces:

4.5″ (120MM) 18:1 L/D Raio, 29.2:1 Gearbox Ratio, Model Jahnel 120, 6 Zone Temperature Control Unit With Pumps and Heaters, 42.5″ Center Line, 150 HP Allen Bradley AC Motor And Allen Bradley Powerflex 753 AC Inverter Drive, Power Feed Roll, Pneumatic Clamp, 42.5″ Centerline, S/N 20107872, SO Number 37872, 400 Amp Disconnect, New In July 2010.

Gala 7 Pelletizing System, New In 1997 12152a
-SLC-7 Cutting Head With 11 KW (14.75 HP) Motor
-Spin Dryer, Model 2016, 5 HP Motor, Rated to 5,000 LBS/HR
-PS9 Swing Gate Agglomerate Catcher
-3 Row Die With 48 Holes Per Row
-3 Arm Cutting Hub
-Gala Control Panel
-Waterbox
-IS 250 Integrated Sieve Tempered Water System With 1/2 HP Disperser and Immersion Heater, S/N 972404
-140 GPM TWS Tempered Water System
-Misc Water Pumps
-Filter
-Misc. 3.5″ Stainless Piping

12152b12152c

398 Ton Nissei Injection Molding Machine, Model ES7000-100LE, 32 Oz, 2000 Vintage

12211

 

 

 

 

 

 

 

 

Used 398 Ton Nissei Injection Molding Machine, Model ES7000-100LE, 32 Oz, 2000 Vintage, Serial #H36U007

Clamp Force………………………………………..398 Ton
Shot Size…………………………………..32 Oz
Platen Size…………………………………41.5″ x 41.5″
Tie Bar Spacing…………………………..28.9″ x 28.9″
Mold Height(Min/Max)…………………..13.8″ x 38.23″
Ejector Stroke……………………………..5.9″
Clamp Stroke………………………………25.6″
Daylight………………………………………52″
Voltage……………………………………….460 V
Controller……………………………………9300 T
Hours………………………………………..43,000
230 Volt

12211a

2.5″ Davis Standard Thermatic Extruder available!

12072j

 

 

 

 

Item #: 12072J
Model: 25IN25
Year: 1998
Manufacturer: Davis Standard
Size: 2.5

2.5″ Davis Standard thermatic Extruder, Model 25IN25, 24:1 L/D Ratio, Water Cooled, 42″ Centerline Height 4 Barrel Zones, 7 Die Zones, Amp Meters Per Zone, Pressure Readout, RPM, Melt Temp, Belt Driven To 17.28:1 Gear Box Ratio, 75 Hp Gearbox Rating, With Magnetek AC Drive, Solid State Relays, Comes With Screw, Davis Standard Barrel Clamp, Manual Screen Changer (missing breaker plate) and ISO Transformer.
150 Amp Breaker
S.N V7463
SO #61065
1998 Vintage

Approximate Dimensions and Weight 8′ L x 3′ W x 8′ H, 5,000 LBS.

Machine Sold AS-IS, please contact your Arlington Sales Rep for refurbishment options.

12072j-a

200 Ton Toyo Injection Molding Machine, Model SI-200 II, 15.90 OZ, 2002 Vintage

12065

 

 

 

 

 

 

 

 

Used 200 Ton Toyo Injection Molding Machine, Model SI-200 II, 15.90 OZ, 2002 Vintage

Clamp Force………………………………………….200 Ton
Barrel Size…………………………………………….55 MM
Shot Size………………………………………………15.90 Oz
Platen Size……………………………………………30.71″ x 30.71″
Tie Bar Spacing……………………………………..22.05″ x 22.05″
Min/Max Mold Height………………………………7.87″ x 19.69″
Ejector Stroke………………………………………..4.72″
Clamp Stroke………………………………………..18.50″
Controller………………………………………………PLCS-10
Options………………………………………………..Wired For Hydraulic Core Pull, Knockout

228″ x 54″ Width x 70″ High
Approximately 17,500 LBS

12065a

Crown Underwater Pelletizer, Model UWP36670

12125aCrown Underwater Pelletizer, Model UWP36670,
20 HP Cutting Head Motor, Water Box, 1.5 HP Slurry Motor, Flow Sight Glass, Swing Gate Clamp, Diverter Valve With 2Hp Hydraulic Pump and Accumulator , On Cart, With Tempered Water System, 7.5hp Circulation Pump, 2 Immersion Heaters, American Industrial Tube and Shell Heat Exchanger, Dual 10 Hp Centrifugal Spin Dryers, 70″ x 24″ x 24″ With De-Watering Section, Control System Includes Control Techniques AC Drive For Cutting Head and Spin Dryers, Direct Logic Model 205 PLC Control
Interface Not Included.
Can Be Interfaced with Extrusion Control Ask Your Sales Rep For Details.
460 Volt
S/N 1655
New in 200612125b

12125c 12125d

Battenfelds for Sale!! Installed and Running in Canada! Make offer!

BATTENFELDS
(4) 300 ton Electric, 2012 and 
(4) 393 Ton Hybrid, 2014 

12173b

Item #: 12173B
Used 337 Ton Battenfeld Ecopower,Electric Injection Molding Machine, 29 Oz, 2012

Clamp Force……………………337 Ton
Shot Size……………………….29.20 Oz
Screw Dia……………………….65mm
Tie Bar Space………………….30.2″ x 28.35″
Min/Max Mold Height…………13.78″ x 29.5″
Inj Pressure……………………..21,131 PSI
Unilog B6 Control
Robot Interface
575 Volt For Machine 230 Volt Heaters
5 Point Double Toggle Clamp
Beltless Direct Drive
Servo-Mold Height Adjust
Approximately 25,000-30,000 Hours Use On Each
MAKE OFFER SITUATION
MACHINES STILL INSTALLED
4 AVAILABLE


MAKE OFFER SITUATION 
MACHINES STILL INSTALLED
4 AVAILABLE

12174b

Item #: 12174B
Used 393 Ton Battenfeld Injection Molding Machine, Model TM Xpress 350/3400, 53.19 Oz, 2014 Vintage

Clamp Force…………………………………………..393 Ton
Barrel Size…………………………………………….75 mm
Shot Size………………………………………………53.19 Oz
Tie Bar Spacing………………………………………27.95″ x 27.95″
Min/Max Mold Height……………………………….25″ x 32″
Daylight………………………………………………..54.33″
Controller………………………………………………Unilog B6
Material………………………………………………..PE/PP
Voltage…………………………………………………575 Volts + Heater 240 Volts
Options………………………………………………..Robot Interface, Water Manifold

HIGH SPEED MACHINE WITH ELECTRIC SCREW DRIVE & TOGGLE CLAMP
MAKE AN OFFER!!!

4 AVAILABLE!